Detil
Product Overview
OpenVox A1200E is a full-length analog card. It can be used for connecting analog telephones and analog POTS lines through a PC. It supports combinations of FXS and/or FXO modules for a total of 12 lines.
A1200E is the industrial first 12 port analog card with 12 interchangeable FXS/FXO modules design. It can eliminate the requirement for separate channel banks or access gateways.
The A1200E contains 12 module banks. Each bank supports one analog interface. The module banks may be filled with up to 12 FXO or FXS modules enabling the creation of any combination of ports. Scaling of an analog card solution is accomplished by simply adding additional cards.
A1200E works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.
*The A1200E is the PCI-Express version of the A1200P.
Key Features and benefits:
- Low CPU payload: below 25% CPU usage on server with 8 x A1200E fully loaded with 96 ports after driver installed, on a Celereon D 2.53Ghz.
- Scalable: Just add additional cards to extend the system.
- Modular design: Can upgrade at any time by adding extra FXO or FXS modules up to a total of 12 per card.
- Both 3.3v or 5v PCI slots can be used with this card.
- Module Pin to Pin compatible with X100M and S100M. You can use X100M/S100M modules on this card, or use FXO-100/ FXS-100 Modules from OpenVox.
- Excellent value: High quality at a low price
- Application ready: Use Asterisk to build your IP-PBX system.
- Caller ID and Call Waiting Caller ID
- ADSI Telephones
- Loopstart Signaling Support
- Up to 12 Simultaneous PSTN Calls (Per PCI Slot)
- Interchangeable FXS and FXO modules
- RoHS Compliant.
- Certificates: CE, FCC
Target Applications
- Channel Bank Replacement / Alternative
- Small Office Home Office (SOHO) applications
- Small and Medium Business (SMB) applications
- Gateway Termination to analog telephones/lines
Technical Specifications
- Up to 12 ports through a combination of FXS and FXO modules
- Full-length analog card
- RJ45 connector
- 32 bit 33MHz PCI and fully PCI 2.2 compliant
- 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
- Autosense compatibility with 5 V and 3.3 V PCI busses compatible
- Firmware accelerate I/O access to achieve high stability
- Power: 7W Minimum, 37W Maximum at 3.3 V or 5 V.
- Operation temperature: 0°C to 50°C
- Storage temperature: -40°C to 125°C
- Dimension: 312mm*106.7mm*16mm
- Weight: 161g
Operating Systems
- Linux (all versions, releases and distributions from 1.0 up)
Minimum Hardware Requirement
- 800-Mhz Pentium III
- 128MB RAM
- Available PCI Slot
Certifications
- RoHS Compliant
- Certificates: FCC, CE and LVD