Detil
Product Overview
The Fanvil PA2S is a SIP Audio & Video Intercom and Public Announcement system device for industry application. The media stream transmission adopts standard IP/RTP/RTSP protocol. It has various functions and interfaces, such as intercom, video, broadcast, recording, and short circuit trigger, to adapt different application environments. Users can DIY the paging device easily.
Fanvil PA2 SIP Paging Gateway Key Features
- Exquisite, can be embedded in the internal installation
- Emergency call button interface, active call
- NVR video recording, standard RJ45 interface
- Recording output, 3.5mm standard audio interface
- Audio line out port, expandable external active speaker
- 10W-30W mono channel power ampifier output, according to the input voltage to setting the output power
- Adaptive10/100 Mbps network port, integrated PoE
- Compatible with major platform: Asterisk, Broadsoft, 3CX, Metaswitch, Elastix, Avaya, Etc
Fanvil PA2S SIP Video Intercom & Paging Gateway - Technical Specifications :
Generic
- 2 SIP lines
- Speed dial
- Linkage with IP camera to realize video intercom
- Oral Announcement of the IP address (in English)
- MP3 broadcasting
- Support mono active speaker (audio line out)
- Support audio line in
- Talkback recording output
- Switch signal input and output
- Supports programmable DSS key ports
- PoE enabled
Device Functions
- Auto-answering
- Programmable DSS key
- Through button or web page volume adjustment
- Network time synchonization
- Time plan (task management)
- Incoming call multitask
- Dynamic muticast function
- HTTP API
- Action URL / Active URI
Call Functions
- Call out / answer / reject
- Call waiting
- Intercom multicast
- Speed dial
- Anonymous call (hide caller ID)
Audio
- Narrowband codec : G.711A/U, G.729A/B, iLBC, G.723.1, G.726-32K
- Wideband codec : G.722, Opus
- Full-duplex hands-free speakerpone with AEC
- DTMF: in-band, out of-band, (RFC2833/ SIP INFO)
Network
- Physical : 10/100 Mbps Ethernet
- IP mode : IPv4/IPv6/IPv4&IPv6
- IP Configuration : Static IP / DHCP /PPPoE
- VPN : L2TP OpenVPN
- VLAN
Protocols
- SIP v1 (RFC2543), v2 (RFC3261) over UDP/TCP/TLS
- RTP/RTCP/SRTP
- STUN
- DHCP
- IPv6
- PPPoE
- L2TP
- OpenVPN
- SNTP
- FTP/TFTP
- HTTP/HTTPS
- TR-069
Deployment & Management
- Auto Provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIP PNP/TR-069
- Web management portal
- Web-based packet dump
- Configuration export / import
- Firmware upgrad
- Syslog
Physical Specifications
- Keypad 3 key, including : 2 volume control keys (up & down) + 1 reset key (soft reset)
- RJ45 port x2 : connect the network. WAN Port connect the network, support PoE, and Camera Port connected to original camera
- Blue LED x1 (SIP status and Network status)
- Recording output port x1 : Connect audio devices. *OUT : mixed output of local microphone voice and call voice recording. *PORT : 3.5mm standard audio port. *IMPEDANCE : 15 ohm.
- Ground screw x1
- Passive speaker port 1 : connect the speaker
- Output Power : 4Ω, PoE/10W, 12V/10W, 18V/20W, 24V/30W; related to power supply voltage. 8Ω, PoE/5W, 12V/5W, 18V/10W, 24V/15W; related to power supply voltage. Wire diameter : 18AWG or higher. Port : terminal socket.
- Line out port x1 : connect the active speaker. OUT : adjustable by volume, max up to 1.2Vpp. PORT : terminal socket
- OpenVPN
- DSS key port x1 : connect the external buttons (support LED). LED : output 5.0 Vdc/5mA. PORT : Terminal socket
- MIC in / Line in port x1 : connect the MIC or audio line in device. *The multiplex port microphone input by default, which be configured as audio line input function through software. * Electred condenser MIC is reccomended. * Sensitivity : -38db, impedance 2.2k ohm, bias voltage 2.54Vpp. *PORT : terminal socket.
- Short circuit input & output port x1 (bulit-in relay). *RELAY : MAX DC30V / 2A, AC125V / 0.5A. *PORT : terminal socket
- 2 Parallel power input DC port : DC power input. *DC Power Input : DC12V~24V/2A. *1 Road for 5.5mm DC power seat. *1 Road for the 2 pin terminal socket
- PoE level : Class 3
- Housing Material : Allumunium Alloy
- Installation : Desktop mount / Wall-mounted
- Color : Black
- Working Temperature : -30°C ~ 60°C
- Storage Temperature : -30°C ~ 60°C
- Working Humadity : 10~95%
- Device Dimensions : 113x83x28 mm
- Gift Box Dimensions : 147x114x58 mm
- Outer CB Dimensions : 310x248x322 mm (20 pcs)
note:
** for accessory module for Fanvil PA2S , please refer to Fanvil PA2-KIT